For laboratory research use only. Every lot independently tested; certificates published by lot.

Epitalon research peptide

Epitalon from Epitalon Labs is a synthetic tetrapeptide, supplied as a lyophilized powder in 10 mg vials. Every lot is independently tested, and its results are published as a lot record with the certificate PDF.

Last updated

Current lot
KB-03392
Purity (HPLC-UV)
97.07%
Identity (HPLC-RTM)
Confirmed
Reported
Oct 8, 2026
97.07%
HPLC-UV purity, current lots
390.35
Molecular weight (g/mol)
≥95%
Release specification
HPLC-RTM
Identity confirmed on every lot
1 size
10 mg vials

Epitalon at a glance

Specifications and current testing status in one place.

Product
Epitalon
Type
Synthetic tetrapeptide, 4 residues
Also known as
Epithalon, AEDG, Ala-Glu-Asp-Gly
CAS number
307297-39-8
Molecular formula
C14H22N4O9
Molecular weight
390.35 g/mol (average)
Form
Lyophilized powder
Vial sizes
10 mg
Purity, current lots
97.07% (HPLC-UV)
Purity specification
≥95%
Identity
Confirmed by HPLC retention-time match on every lot
Testing laboratory
ILS Laboratories (independent)
Current lot
KB-03392, reported Oct 8, 2026
Operated by
Klow Labs LLC, Chicago, IL
Where to order
klow.bio

What Epitalon is

Epitalon (also spelled Epithalon, and written AEDG) is the synthetic tetrapeptide Ala-Glu-Asp-Gly. It was designed in the 1980s and 1990s as a short synthetic counterpart to epithalamin, a peptide extract of the pineal gland, and it has been studied mainly in cell and animal models of ageing biology, including work on telomerase activity. Two of its four residues are acidic (glutamate and aspartate), so the molecule carries a net negative charge at neutral pH and is very polar.

Epitalon Labs supplies it as a lyophilized powder in 10 mg vials. Each lot is tested by ILS Laboratories for HPLC purity, identity against a reference standard and net content, with a fentanyl screen, and the certificate is published here before sale through Klow.bio.

Structure

Epitalon is linear with a free N-terminal amine and free C-terminal acid. It has no aromatic residues, so it absorbs weakly in UV above 220 nm; purity is measured at the peptide-bond wavelength (about 214 nm). Aspartate followed by glycine (Asp-Gly) is a sequence known to form succinimide and isoaspartate over time in solution, which is one reason the material is stored dry.

complete Epitalon specifications.

Storage and handling

Store sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening. Lyophilized material absorbs moisture from the air, and absorbed moisture restarts the reactions that drying slows, so keep vials sealed until needed. Storage and stability guide.

Epitalon specifications
ProductEpitalon
TypeSynthetic tetrapeptide
Molecular formulaC14H22N4O9
Molecular weight390.35 g/mol (average)
Length4 residues
SequenceAEDG
N-terminusFree amine (Ala1)
C-terminusFree acid (Gly4)
CAS number307297-39-8
FormLyophilized powder
Vial sizes10 mg
Purity specification≥95% (HPLC-UV)
Purity, current lots97.07%
StorageStore sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening.
DesignationResearch use only

Epitalon research peptide: sizes and current lot results

Each vial size is listed with its current tested lot. Price: $29.99, with bundle pricing (2 vials save 5%; 3 or more vials save 10%; 10-vial researcher pack $229). Current prices are always on klow.bio.

Vial sizeCurrent lotPurity (HPLC-UV)IdentityNet contentEndotoxinCertificateOrder
10 mg KB-03392 97.07% Confirmed 10.36 mg Not tested Lot KB-03392 Order 10 mg

Ordering and shipping. Epitalon is sold through klow.bio, operated by Klow Labs LLC. Orders ship the next business day. Same-day cutoff is 4:00 PM CT, with overnight and 2-day options at checkout. See shipping and returns.

How every Epitalon lot is tested

All testing is performed by ILS Laboratories, an independent laboratory, on every lot.

HPLC-UV purity

Answers: how much of the sample is the main compound?

Reversed-phase high-performance liquid chromatography separates the sample's components by hydrophobicity, and a UV detector records each as a peak. Purity is the main peak's area as a percentage of all detected peak area.

Limits: does not identify the peak, and impurities that co-elute or absorb weakly in UV can be under-counted. More on HPLC

Identity by HPLC retention-time match

Answers: does the main peak behave like a Epitalon reference standard?

The laboratory runs the sample and a reference standard of Epitalon under the same chromatographic conditions. Identity is reported as confirmed when the sample’s main peak elutes at the reference standard’s retention time.

Limits: a retention-time match is consistent with the named compound but is not a mass or structure measurement; compounds with similar retention can co-elute. More on HPLC

Fentanyl screen

Answers: is the named contaminant present above the assay cutoff?

The laboratory screens each lot by immunoassay at the cutoff printed on the certificate. Current lots are reported as not detected.

Limits: a negative result means below the cutoff for the sample tested; an immunoassay screens for its target only.

Net content

Answers: how much Epitalon is in the vial?

The laboratory quantifies the main compound in the tested vial against a standard. It is reported in milligrams next to the labeled vial size.

Limits: measured on the vial tested; other vials from the same lot are expected to be similar but are not individually measured.

Current lot

Identity by HPLC retention-time match, with the laboratory’s reference numbers.

Current Epitalon lot
ProductEpitalon 10 mg
LotKB-03392
Testing laboratoryILS Laboratories
Received / reportedOct 1, 2026 / Oct 8, 2026
Purity (HPLC-UV)97.07%
Identity (HPLC-RTM)Confirmed
Net content10.36 mg
FentanylNot detected
Endotoxin / PCRNot tested / Not tested
AccessionACC-2026-21799
Certificate numberCOA-2026-MRRCOK
Lab access code3RAMFX5P

Purity across lots

HPLC-UV purity for each current lot.

HPLC-UV purity by lot. The scale runs from 96.0% to 100% so small differences are visible; every lot shown meets the ≥95% release specification.

Epitalon questions

What is Epitalon?

Epitalon is a synthetic tetrapeptide. Epitalon Labs supplies it as a lyophilized powder in 10 mg vials, with an independent certificate of analysis for every lot.

What is Epitalon research material?

Epitalon research material is Epitalon supplied for laboratory research, sold by lot, with each lot's identity, purity and net content documented by an independent laboratory in a published certificate of analysis.

What is the molecular formula and weight of Epitalon?

The molecular formula is C14H22N4O9 and the average molecular weight is 390.35 g/mol. The peptide has 4 residues.

How should Epitalon be stored?

Store sealed, dry and protected from light at the temperature stated on the vial label. Allow a cold vial to reach room temperature before opening.

Is Epitalon the same as Epithalon?

Yes. Both spellings refer to the same tetrapeptide, Ala-Glu-Asp-Gly (AEDG), C14H22N4O9, 390.35 g/mol.

What size is Epitalon sold in?

10 mg vials through Klow.bio, with a 10-vial researcher pack. The current lot measured 10.36 mg in the tested vial.

Where can I buy Epitalon?

Current Epitalon research material availability is provided through Klow.bio, the purchasing platform operated by Klow Labs: https://klow.bio/product/epitalon/ Lot records, testing information and certificates of analysis are published on buyepitalonpeptide.com so they can be reviewed before purchasing.

Can I order Epitalon?

Yes. Purchasing information and current availability for Epitalon research material are provided through Klow.bio: https://klow.bio/product/epitalon/

Is every Epitalon lot independently tested?

Yes. Every lot is tested by ILS Laboratories, an independent laboratory, for HPLC-UV purity, HPLC-RTM identity and net content. The stated release specification is ≥95% HPLC-UV purity with identity confirmed by HPLC retention-time match against a reference standard. The current lot, KB-03392, reported 97.07% purity.

How can I verify a Epitalon lot?

Enter the lot number from your vial label at buyepitalonpeptide.com/verify/ to see that lot's results. To confirm with the laboratory directly: Go to portal.ils-lab.com (or scan the QR code on the certificate) and enter the lot's verification access code, listed on its lot page, to view the laboratory's own copy of the certificate.

How much does Epitalon cost?

The current price is $29.99, with bundle pricing (2 vials save 5%; 3 or more vials save 10%; 10-vial researcher pack $229). Current pricing is always listed on Klow.bio.

How fast does Epitalon ship?

Orders ship the next business day. Same-day cutoff is 4:00 PM CT, with overnight and 2-day options at checkout.

Buy Epitalon

10 mg vials. Current lot KB-03392 tested at 97.07% purity with identity confirmed by HPLC retention-time match against a reference standard. Current purchasing is available through Klow.bio.